Capacitors can clean up your FPV video feed, protect electronics from voltage spikes and reduce the noise in Gyro signal to make your FPV drone fly better. In this tutorial I will explain what low…

This tutorial explains the different flight modes in Betaflight and how to setup Betaflight modes. The process should be similar regardless the quadcopter, flight controller or radio you use.

So you are new to FPV drones and wondering where to start? You have come to the right place! This is the first tutorial you should read on this blog, it explains the basics of…

Charging FPV drone LiPo batteries in the field allows you to fly longer without bringing too many packs. I will share my field charging solution which I think is more economical and practical than buying…

This tutorial explains how to setup TBS Crossfire for OpenTX radios such as the TX16S. I will also show you how to connect Crossfire receiver to a flight controller and configure it in Betaflight. Tracer…

USB port falling off is not uncommon in flight controllers. If your FC has a broken USB port and can’t connect to Betaflight (or INAV Configurator) and flash firmware, here are some fixes you can…

In this tutorial I will show you how to setup HDZero in a Betaflight FPV drone from scratch, including connection to the flight controller, Betaflight OSD configuration, SmartAudio setup, firmware update and explaining the options…

In this tutorial I will show you how to setup Walksnail Avatar FPV System with Betaflight. I will cover how to wire and install the VTX in an FPV drone, how to pair the Air…